Prerequisites

The following lists are here to serve as a guide to help simplify your experience when dealing with steps or decks and can vary from customer to customer. (This page is Under Construction)

New homes:

  • Have your drawings/blueprints ready because we will be asking for them. Not the plot plans, we can’t do anything with those.
  • What form of supports will you have ready for the installation?
  • If you are pouring a wing wall as a support, please ensure it is at the right height by following this:
    1 riser (platform) = wing wall minimum 2 inches down from the top of the foundation
    2 riser = wing wall minimum 9 inches down from the top of the foundation
    3 riser = wing wall minimum 17 inches down from the top of the foundation
    4 riser = wing wall minimum 24 inches down from the top of the foundation
    5 riser = wing wall minimum 31 inches down from the top of the foundation
    6 riser = wing wall minimum 38 inches down from the top of the foundation
  • If the wing wall is poured too high, we must charge as much as 500$ to cut it down to make the step fit.

Existing homes:

  • Is your current item wood, metal, precast, or poured in place? If you are unsure, please send us photos of two different angles (front and side).
  • When contacting us, please include the measurements of the entire width, and height from top most to bottom most of the item needing replacement.